Hotline
13071380888
13071380888
With the development of modern industrial technology and production, the requirements for the cleanliness of production conditions and environment are getting higher and higher. Not only does the floor of the workshop require wear resistance, pressure resistance and corrosion resistance, but its cleanliness and sterility also become an important factor in measuring the level of modern production. The indoor air dust content should be as low as possible.
Such as food, tobacco, electronics, precision instrumentation, medicine, medical operating room, automobile and airport production and production sites, all require clean workshops, which is not only the need to improve working conditions, but also the guarantee and mark of modern product quality. To achieve such a requirement, as a main component of the clean workshop, the floor should have two basic conditions: first, the ground itself is not dusty; second, there is no gap on the ground.
Epoxy self-leveling is an environmentally-friendly epoxy resin and a special curing agent as the main film-forming material. It is processed by adding various additives, pigments, fillers, etc., through strict proportioning. It not only has excellent chemical properties such as water resistance, oil stain resistance and chemical corrosion resistance, but also has good adhesion, high mechanical strength, low shrinkage rate of film after curing, and can be applied as a thick film at one time, so it is widely used. In the finishing of modern industrial floors. This process can flow according to the unevenness of the ground, automatically level the ground and dry quickly, and the solidified surface will form a smooth, flat and seamless mirror effect surface layer.
