色色色狼友视频麻豆-卡通动漫无码区-国产嗳嗳啪啪视频-岛国一级特黄av无码

Application range of tin titanium silencer

It is widely used in hospital, home, office, outdoor floor, stadium, park, square, swimming pool, shopping mall, tourist landscape, corridor and other floor floors. It has a variety of colours, monochrome, mixed colour, pattern and so on.

 

Characteristics of HJDP-Y01 tin titanium silencer

Bright color, long and new, anti-skid, abrasion and scratch resistance, waterproof and impermeable, anti-fouling and anti-corrosion, not easy to aging, simple construction, clean and simple, healthy and environmental protection, high cost performance, superior quality, widely used.

 

Schematic diagram of HJDP-Y01 tin titanium silencer

 

 

Construction technology of tin titanium silencing floor

First, plain ground treatment: grinding seam treatment, the temperature seam on both sides of the base 10 wide grinding into a bevel depth of 5, so that the surface of the temperature seam into V-shaped.

 

2. Paint special primer: apply special primer evenly on the ground, do not leak out or be too thick, in order to increase the adhesion of the coating to the plain ground;

 

(If the ground is uneven, additional treatment is needed: after adding water-based primer to a proper amount of water, evenly brush the ground, not to leak or be too thick, to increase the strength of the plain ground, and increase the adhesion of the coating to the plain ground. Scraping Leveling Layer: Water-borne resin mortar is proportionally blended, and the blended material is evenly coated with a trowel to achieve the effect of smoothness, no holes and no knife prints. )

 

3. Tin-Titanium Intermediate Coating: After mixing Tin-Titanium Intermediate Coating Material in the correct proportion, it is evenly coated on the ground, and can not be leaked or stacked.

 

Four, tin titanium color paint: tin titanium paint is a two component water-based material, must be in accordance with the prescribed proportion.

 

5. Tin-Titanium topcoat: Tin-Titanium topcoat is made of special flash flakes and transparent Tin-Titanium topcoat material. Tin-Titanium topcoat material is a two-component material, which must be in accordance with the prescribed proportion.

 

6. Tin-Titanium Shielding: Tin-Titanium transparent extinction is a water-based two-component material, transparent, colorless and tasteless, starting to uniformly roll or spray the surface.

 

Technical parameters of HJDP-Y01 tin titanium silencer floor